Rescue Mode

Support for hardware and software issues. Ask your question and (hopefully) someone will give you an answer.
Post Reply
Posts: 81
Joined: Sun Dec 18, 2011 10:29 pm

Rescue Mode

Post by mb1 »

Posted by '3viewSupport' on 28/02/11 at 06:55 PM

There are two operating systems in a 3view box. One on the hard drive and one in FLASH memory. Booting from Flash memory is called 'rescue mode'.

You can switch between one and the other by booting the box with the power key depressed.
> power off
> press power key on front panel
> power on
> release button at 3view splash screen

To switch back to hard drive mode, select START APPLICATION from the list of options.

In rescue mode, you have a few options.
Most importantly, you can reinstall your software or format your drive. Rescue mode is still 'online' so you can update the box from the network.

Post Reply